 |
 RUSSIAN
COMPLETENESS OF THE EQUIPMENT FOR MANUFACTURE A FOAMISOL
1. EQUIPMENT
equipment УПП-3М / УПП-3М1 / УПП-4М
Flanks 50 L. - 2 piece.
Hoses: d = 40 mm., l = 6 м. и d = 15 мм., l = 4 м.
Into completeness enters: the project of specifications, a production schedules, a guarantee on the equipment.
The price: $700 / $800 / $920 USD
2. The compressor made under equipment, parameters: 500 L/mines, 6 atm., 380 V
The price: $900 USD
3. Training, start-up - adjustment, secrets on manufacturing - 985 uah.
CHARACTERISTICS OF THE EQUIPMENT
We offer the equipment which allows release carbomy? porous polyfoam (foamisol). The simple technology and the small sizes of installation allow to adjust process of manufacture for 1-2 weeks.
| УПП-3М | УПП-3М1 | УПП-4М |
| The sizes, mm | 750x400x400 | 1000x500x500 | 1000x500x500 |
| Voltage, V | 220 | 220 | 220 |
| Power consumption, kW | 1.2 | 1.5 | 1.5 |
| Productivity, m3/hour | 6 | 7,5 | 8 |
| Weight, kg | 65 | 80 | 85 |
Mobility of the equipment allows three workers release polyfoam, as in a hospital (the area of 100-150 m2), and is direct on building sites, filling him in emptiness of walls, partitions, floors and roofs.
BASIC CHARACTERISTICS FOAMISOL
| Heat conductivity | 0.035 - 0.045 W/mK |
| Working range of temperatures | -50...+120 °С |
| Volumetric density | 8 - 30 kg/m3 |
| Durability on compression | 0.003 - 0.025 kg/sm2 |
| Sorption humidifying through 3 day | Up to 20 % on weight |
| Water absorption for 24 hours | No more than 20 % on volume |
The plate of polyfoam thickness of 50 mm with rigid external facing on heat conductivity meets 75 mm of expanded polystyrene or 100 mm of mineral cotton wool. Polyfoam thickness absorbs of 100 mm up to 95 % of sound fluctuations.
COMPONENTS FELT WOOLEN OF POLYFOAM
- Carbomyd-formaldegyde pitch КФМП - 15 - 22 kg.
- Orthophosphate an acid - 0.3 kg.
- Foamer - 0.2 kg.
- Water 40-50°C - 20 L.
We use the Ukrainian inexpensive raw material, cost and which quantityis resulted in the table. Thus at us 1 m3 of polyfoam in density of 25 kg / m3, нhas turned out, but from the same components it is possible to receive 2 m3 of polyfoam of smaller density.
| Components | Quantity | the Price | the Sum |
| Pitch "КФМТ-15" | 20 | 0.24 | 4.80 |
| OA an acid | 0,28 | 0.30 | 0.8 |
| Foamer | 0,15 | 3.25 | 0.49 |
| The sum
| | | 5.70 |
For comparison: 1 m3 usual foam polystyrene is sold on 30 USD/m3. We sell on 26 USD/m3
|
|
|
Foam concrete