RUSSIAN

QUESTION:
I want to build a cottage extremely from foam blocks. There are some questions. Than will advise to revet? A bar? Plaster? Heard, that not breathing walls from foam concrete can cause dampness in the house. What minimal thickness to make walls that it was warm? The minimal density for a house in 2-3 floors.
THE ANSWER: Can revet everything. Foam concrete does not cause dampness in the house. All depends on density of mark foamconcrete, the warmest - 400 (but it is used only as partitions). The minimal density for a house of 600 kg / m3.

QUESTION:
How many there is ?utting technics for foam isol? What amount of forms is necessary for continuous process their cost?
THE ANSWER:
Cutting a framework for foam isol- 150 hrn. Cost of the form 1?1?1 - 790 hrn. Cost of the form 1?1?1,5 - 890 hrn. Forms 6-7 pieces are necessary

QUESTION: Question on practical application of your equipment. That will be, if the compressor provides pressure of 8 kg / sm2, but productivity only 200-250 ?/minutes. The volume of release or manufacturing foam isol will simply decrease at such parameters of the compressor it is impossible basically? The question interests in connection with a problem of minimization large-sized parameters of the equipment for operating conditions on a building site.
THE ANSWER: According to the technical rules, for reception of a qualitative material the compressor should have such parameters: 6 atm. - 500 l/minutes.

QUESTION:
We plan pass a factory on manufacture of foam concrete. It is necessary 80 cube. In change (8 hour.). Purchase will cost what cost at you equipment (shipment at own expense) and what completeness of this equipment for us. Forms under Cut+ Cutting the machine.
THE ANSWER:
Cost of the equipment 42800 hrn. Into the complete set of installation enters: concrete mixer, foam generator, the compressor. The cutting machine 35800 hrn. Cassette forms on 1,5 m3 for blocks 600?300?200 - 4600 hrn., under condition of the order over six forms the price 3900 hrn. + the additional equipment

QUESTION:
Tell, please, the room in which the equipment for manufacture of foam concrete will be established, productivity approximately 10 m3 / hour should answer what requirements:
  • The area
  • Height
  • Temperature of air
  • Stability of a voltage (220/380)
  • Other obligatory conditions
    THE ANSWER:
  • The area - from 1000 m2
  • The height - is not lower than 4 m.
  • Temperature - room
  • Voltage - 220 In, 380 In

    QUESTION:
    I am interested with an opportunity of purchase pass a factory on manufacture foam blocks 200-300 m3 a month (22 working days).
    1. The list and cost of the equipment.
    2. Amount of replaceable forms and back for the given volume (price)
    3. An opportunity of leasing
    THE ANSWER:
    1. Cost of the equipment 23000 hrn. Into the complete set of installation enters: concrete mixer 0.55 m3, foam generator, compressor.
    2. Cartridge forms on 1,5 m3 for blocks 600?300?200 (42 blocks) - 4600 hrn. Under condition of the order over 6 forms - the price 3900 hrn.
    3. Leasing we do not practise.

    QUESTION:
    Where it is possible to get the equipment on manufacturing foam concrete in Ukraine and in Russia, its prices? The "know-how" of foam concrete? A compounding of manufacturing of foam concrete?
    THE ANSWER:
    The equipment on ?? is possible get in Kiev. The prices from 23000 hrn. Up to 64500 hrn. You can separately get the technical and technological documentation, assembly drawings on installation. The price 8000 hrn.

    QUESTION:
    Up to what minimum it is possible to reduce time of hardening foam concrete the block if to increase surrounding temperature or to heat up the form directly? (it is possible to do it whether or not, whether there is in this process any dependence and whether it will be reflected in characteristics of the block)? Whether manufacturing blocks of non-standard forms and the sizes, and also presence in them of apertures is possible?
    THE ANSWER:
    Minimal time of hardening - 8 hours. Manufacturing blocks of the non-standard sizes, any form, and also presence in them of apertures is possible.

    QUESTION:
    At you in the business - plan the charge of cement for manufacture foam concrete (especially in density 400 kg / m3) are much lower than blocks, than at other manufacturers of the similar equipment and foamer, by the way, too. Why?
    THE ANSWER:
    The charge of cement is specified approximately, because exact those. The rules has has a free market price. We spend exact dosages of components under concrete target base.


  • AERATED CONCRETE
    FOAMISOL
    FROTHER
    POLYURETHANE FOAM
    AERATED CONCRETE
    FOAMISOL
    POLYURETHANE FOAM
    SLAG BLOCK
    MACHINE TOOLS FOR ARE SHARP FOAM BLOCKS
    Rent of installations on manufacture of materials :
    Foam concrete
    (up to 3 m 3 /hour)
    80 c.u. for day of work
    Foam isol
    (up to 8 m 3 /hour)
    50 for day of work

    it is Necessary for c.u. presence of a liquid pledge for the sum of the rented equipment

    To address by phone:




    Advertising on our site

    It is offered to the building organizations and the companies to place professional advertising on our site.

    On questions of advertising address by phone:


    News   |   Company   |   Strategy   |   FAQ   |   Price   |   Contact
    © 2002-2008. SME «Continium»